American Standard - BATH AND SHOWER TRIM KIT

Below are all the different types of American Standard. Select the device of your choice, to download the manual

Contents

1 INSTALL VALVE TRIM Figure 1 Remove plaster guard from valve Push CAP 1 over VALVE CARTRIDGE I2J until seated against stop Figure 2 Push ESCUTCHEON HOLDER 3 onto CAP 1 and attach to valve body with LONG SCREWS I4J Mount ESCUTCHEON SUPPORT 5 to ESCUTCHEON HOLDER I3J with 4 SHORT SCREWS 6 Figure 3 Install ESCUTCHEON 7 onto CAP 1 and push flush against finished wall Escutcheon I7J will snap fit onto ESCUTCHEON SUPPORT I5J Note Apply sealant or Teflon Tape to shower arm Remove PIPE PLUG and CAP 11 2 from shower pipe and tub filler pipe Hold ADAPTER HJ onto VALVE STEM 2 and install ADAPTER SCREW I3 through ADAPTER HJ into VALVE STEM l2J Tighten ...